Exhibitor news

The new EC frameless DT 50 is a brushless motor without a flange and now also available with integrated Hall sensors. The design allows for optimal installation versatility, whether in articulated joints, machine tools, or exoskeletons. With high torque density and outstanding efficiency, it enables precise, dynamic motion with minimal heat generation. Additional sizes — 38 mm, 65 mm, and 85 mm — will be available next year.

Ideal access, simply solved || Whether for maintenance, repairs, or work on the machine: the Robotunits telescopic sliding door gives you optimal access to your machine. The simple, fast and space-saving handling helps with entering and leaving the machine area in the shortest possible time – whether by foot or with your forklift. Free passage of up to 4 meters can be achieved as standard, for special solutions we are available for consultation.

As a logical evolution of the successful EKS system, the latest generation offers numerous advantages in digital access control and operating mode selection. These advantages include: easy implementation through project templates with predefined functions and data fields; simple assignment of access permissions via input masks; easy revocation of permissions via an expiration date; easy implementation of security standards for data handling and rights assignment; and simple, vendor-independent integration into any PROFINET environment.

For more than 50 years the classic Euromas industrial enclosures have been an integral part of Bopla Gehäuse Systeme GmbH’s product range. With two materials, basic designs and lid variants each, Euromas X satisfies the typical demands made of IoT devices – with no compromises! At the same time, and with its new sizes, the enclosure variant fills the gaps in the Euromas range. The Internet of Things (IoT) requires the capture and processing of large quantities of data in almost all aspects of life and everywhere in the world. Operating the devices used for this purpose should, of course, be as easy as possible. Normally this means fewer and simpler keys and status displays which ideally are combined in a single membrane keypad. At the same time, the devices must be installed quickly and without any problems at the place of use – and when possible without any need to open the device. Two materials, two basic designs and two lid variants No problem for Euromas X. In all cases, the new enclosure, available with or without moulded-on wall brackets for problem-free mounting, has a recessed surface for the integration of membrane keypads. As for enclosure materials, the customer can choose between ABS for cost-optimised applications and polycarbonate (PC) for use in challenging circumstances. For Euromas X enclosures made of PC, and in addition to the opaque lid, BOPLA offers a crystal-clear lid. The classic Euromas enclosure colour is light grey (similar to RAL 7035). Additional sizes With regard to the sizes of the new Euromas X enclosure, BOPLA took into consideration the requirements of typical IoT devices. Numerous intermediate sizes and square designs fill a number of gaps in the Euromas range.

CFM-PC hinge in UL-94 V0 self-extinguishing technopolymer, integrates the mechanical function of a standard hinge with the possibility to transmit electrical current from a jamb to the attached door. The UL-94 V0 certification confirms that the material, when subjected to a vertical burn test, extinguishes within 10 seconds without producing flaming drips. This ensures a high level of safety in case of accidental exposure to heat sources or open flames - an essential requirement for applications in industrial environments, laboratories, or portable equipment where protection against fire hazards is critical.

- 6 lengths from 190 to 1040 mm - Robust aluminum housing - Tempered float glass front panel - Homogeneous, flicker-free light - M12 connector

For a long time, grey, rectangular enclosures dominated industry, mechanical engineering and infrastructure. This design is still in demand because it is robust, space-saving and versatile. At the same time, requirements have changed: design, feel and usability now play a central role wherever electronics are visible and used regularly. ‘Today, an enclosure is much more than just a protective shell,’ says Mathias Bünte from BOPLA. ‘It becomes a visible part of the product and a carrier of brand and product values. Especially with complex technology, the external appearance is becoming increasingly important.’ From protective enclosure to user interface This development is driven by modern operating concepts from consumer electronics. Enclosures are increasingly functioning as three-dimensional user interfaces. In addition to buttons, switches and indicator lights, digital components such as touch displays, sensors, light elements and antennas are being integrated. BOPLA develops enclosures that meet these requirements while also incorporating the brand's colour and design language. This allows industrial devices, such as controls in agricultural or construction machinery, to be integrated into a holistic brand experience. Material and manufacturing diversity This diversity is based on a broad spectrum of manufacturing and processing technologies. In addition to plastic injection moulding, aluminium profile, aluminium die-casting and stamping-bending technology, BOPLA also relies on additive processes such as 3D printing. Customised solutions are also possible for surfaces and colours. The high level of vertical integration enables machining, coating, painting, printing and system integration from a single source. ‘We can produce both large series and small, exclusive quantities,’ says Bünte. ‘From housing machining to the integration of electronic components, we create solutions that are precisely tailored to our customers' requirements.’

Energy efficiency means more than just saving money – it opens up new opportunities for competitive advantages and sustainable development. SMC supports you in rethinking existing processes and optimally utilizing potential. Our solutions are based on five fundamental principles: demand-driven generation, energy recovery, precise consumption monitoring, well-considered decisions, and efficient action. Benefit from our many years of experience and proven technologies that reduce energy consumption, lower costs, and simultaneously embed sustainability in your processes. This is how you combine efficiency with responsibility – for today and tomorrow.

- 4 Komponenten sind ausreichend: Das EASY BRANCH -System besteht aus wenigen Elementen, die zum Netzanalysator hinzugefügt werden. - Drastische Reduzierung der Verdrahtungszeit - Keine Verdrahtungsfehler - Schnellere Einstellung - Kein spezielles Kabel notwendig

Unser Teamleiter im Engineering ist als EPLAN Certified Engineer zertifiziert. Damit stellen wir sicher, dass unsere Planungsprozesse mit EPLAN strukturiert, normgerecht und effizient umgesetzt werden – von der Elektrokonstruktion bis zur fertigungsgerechten Dokumentation.

The new positioning controllers, with certified STO function up to SIL 3 / PL e category 3, combine advanced control performance and safety in a compact form. They enable precise motion control in modular machines, collaborative robots, or autonomous vehicles. Thanks to versatile interfaces, they can be seamlessly integrated into existing automation systems.

Linear movements Solution: Use of linear axes or linear tables with: • Toothed belt • Spindle • Linear motor (ironless or iron core) • Rack and pinion • RollerDrive mechanism

TRsystems from Trossingen has developed a suitable solution for the discontinued SIMATIC Comfort Panels TP1500, TP1900 and TP2200. Among other things, the “notion.S - Comfort Panels” series fulfills the “WinCC Advanced” HMI functionality. As the notion.S - Comfort Panels are equipped with the latest operating systems, they are also prepared for future developments of HMI systems. The long-term available and maintenance-free technology includes compatible installation dimensions, exchangeable data carriers and a significantly higher performance capability. In addition to the TCP/IP connection, the Ethernet interfaces offer connection to SIMATIC-S5 and SIMATIC-S7 controllers via additionally available accessories. State-of-the-art capacitive touchscreen haptics and device optics promise the smartphone feeling common today. Siemens, WinCC und SIMATIC are registered trademarks of Siemens AG, München