Exhibitor news

The new BOP 7.0 PQ and BOP 10 BoPad console variants are based on the existing BOP 7.0 and BOP 10.1 BoPad enclosures, but their higher shape provides more space for the installation of electronic components. The new design has a greater angle for the operating surface, and this ensures more operating comfort. In addition, side-mounted recessed grips make it even easier to handle the BoPad enclosures. The rear panel is positioned further back, which increases the mechanical protection of the interfaces. As with all the hand-held and console enclosures in the BoPad range, the new models also have a recessed area in the lid for the integration of membrane keypads and touch screens. A polished frame creates a high-quality appearance and protects the operating surface. All BoPad enclosures provide protection class IP40 as standard. However, this can be increased to a maximum of IP65 at any time by the use of optional seals in four colours (black, white, signal red and signal blue), and also subsequently if required. All BoPad enclosures are supplied in two colours (black and white). In addition, and especially for BoPad hand-held enclosures BOPLA offers as an option coloured impact protection in black, signal yellow, signal red and signal blue. As always, BOPLA can provide special colours on request for enclosures and impact protection.

BOPLA’s Mathias Bünte explains, “CombiNorm-Control is especially interesting for applications in the building automation sector or in so-call smart homes. The German DIN 43380 has established itself as an international standard in this field of application.” CombiNorm-Control has a typical “T-shape” design, and the front part of the enclosure is dimensioned in such a way that it can fit through a standardised panel cut-out with a height of 45 mm. In the rear section there is assembly space on both sides for connection terminals. Of course, for a standardised enclosure system the width is also defined precisely and stated in “M” module widths (1M = 17.5 mm). CombiNorm-Control is available in five different standard widths, and more versions are planned. As with all products in the CombiNorm series, the integrated DIN rail adapter makes possible fast, efficient mounting on a TS35 DIN rail in accordance with DIN EN 60715. For a fast start to a project, BOPLA offers its customers a complete set in every size with the matching terminals and standard accessories. Although to a large extent the external enclosure design is determined by the DIN norm, the configuration can vary considerably, depending on the application. For this reason, CombiNorm-Control is mostly constructed in a modular way. The enclosure can be configured individually with the use of different front panels and terminal covers. The basic body consists of few individual components which can be latched together without the use of any tools.

The update showcases 12 years of collaboration with Beckhoff, highlighting the extensive capability and versatility of the GFX family of products. Together, XTS and GFX have established themselves as global leaders in Smart Conveyor Technologies, offering a wide range of solutions designed to meet diverse industrial needs. The updated catalogue features several additions to the GFX range of products.

With the new NDFC gearbox series, Neugart expands its portfolio for delta robot applications, combining cost efficiency with dependable performance. This series is designed for use cases where maximum precision is not the top priority, but reliability, robustness, and an attractive price-performance ratio are essential. Featuring an output stage from our proven precision series, the NDFC gearboxes are positioned below the NDF series while maintaining the trusted sealing concept and the dynamic, inertia-reducing clamping system on the drive side. The NDFC series includes three frame sizes (064, 090, and 110) and, with its two-stage ratios ranging from 16 to 100, covers a wide range of applications. Standard torsional backlash is less than five arcminutes and can be optimized to under three arcminutes for frame size 064 and under one arcminute for frame sizes 090 and 110. This allows users to choose precisely the level of precision required for their application, while realizing additional cost savings if the standard backlash is sufficient.

Industrial-grade insertion of electronic and power cables into a grommet housing - Available in 4 sizes for all standard contact inserts - Up to 7 threads for various cable and hose fittings - Enables tensile-resistant and leak-proof mounting of different cables - Particularly suitable for MIXO module inserts with electronic, power, and compressed air modules - Housing can be disassembled for easy assembly - Pushbuttons, switches, and indicator lights can also be mounted - The divisible housing allows for the integration of electronic modules - Integrated threaded bolts for grounding connections - Also available with an integrated docking frame with centering pin for automatic tool changes, autonomous robots, and automatic battery charging

Industrial VPN Gateway for IIoT Data Acquisition and Monitoring Description: - Standard version with 2 expansion slots, 4x LAN and SD card slot - Other versions FLEXY 201, 202 and 203 with slots for 4 expansion modules - Includes Talk2M Visualization (IIoT Cloud Dashboard) - End-to-end encryption with SSL/TLS protocol - Expansion modules WLAN and G/LTE (Europe, North America and APAC (external antenna)) - Interface modules for MPI/Profibus, RS232/422/485, digital inputs/outputs and USB - Compatible with PLCs from Siemens, Schneider, Rockwell, Allen Bradley, Omron, Mitsubishi ... - Gateways with OPC UA support - Alarm management (mail, FTP, SMS, data mailbox), archiving, visualization - Programmable with Basic and Java - Memory 128MB SDRAM, 30MB Flash - Language variants in DE, UK, FR and SP switchable - Visualys Dashboard for EWON and DataMailbox-Industry 4.0 Cloud Service Technical data: - Snap-on mounting on DIN rail - Power supply 12 to 24 V DC +/- 20% - Operating temperature -25°C to +70°C

Future-proof control cabinet cooling With R290, the required amount of refrigerant is reduced by up to 75%. Even at high ambient temperatures, R290 delivers full cooling power. The inverter continuously regulates the speed of the compressor and fan, thus optimally adapting the cooling capacity to the demand. The low GWP of R290 (0.02) significantly reduces the climate impact of each individual chiller. A housing that is approximately 30% smaller saves space, reduces CO₂ emissions during transport, and minimizes vibrations. Technical specifications: - Nominal power: 1 to 2.5 kW - Cooling capacity range: 300 - 1,100 W, 500 - 1,800 W and 600 - 2,700 W - Refrigerant: R290 according to IEC/UL60335-2-40, F-gas compliant, no PFAS ban - Efficiency: EER up to 3.6 in the largest version - Voltage: 120 - 230 VAC or 360 - 480 VAC 2-phase - Housing: Powder-coated sheet steel RAL7035 or stainless steel V2A - Wall mounting, recessed or semi-recessed installation with the same unit - Operating temperature: 10°C to 60°C - Approvals: CE, UKCA, cURus, cULus

The Advantech AMAX 5000 series is a modular slice I/O system designed for compact, high‑performance control solutions based on EtherCAT. It combines edge controllers with finely scalable I/O modules for digital, analog, and temperature signals, including communication and power supply modules. Galvanically isolated signal paths, hot‑swappable modules, and front‑side wiring simplify maintenance and system expansion during operation. The series supports deterministic real‑time communication, condition monitoring, and connectivity to higher‑level IT/IoT systems, making it ideal for flexible, cost‑optimized automation concepts. Available I/O modules: - Digital inputs and outputs (up to 16 channels per module) - Relay output modules - Counter and encoder input modules - Analog input and output modules - Temperature input modules (RTD/PT and thermocouples) Coupling and power supply modules: - Modbus TCP coupling module - EtherCAT coupling module - Communication module with RS‑232/422/485 interfaces - Power supply module up to 2 A including 4 digital inputs - Ultra‑compact PC‑based PLC for CODESYS applications

Connecting PROFIBUS, PROFINET, Modbus, RS‑232, Ethernet/IP and EtherCAT Commissioning is performed via a web‑based, intuitive drag‑and‑drop interface, a dedicated Ethernet configuration port, and clear documentation, significantly reducing engineering effort. Hardware‑accelerated endian conversion (byte swapping) automatically adapts data formats between different PLC platforms without adding load to the controllers. Security features such as Secure Boot and a configuration protection switch prevent unauthorized changes and tampering. Available versions: - RS‑232/485 → PROFIBUS slave - EtherCAT master → PROFINET RT device (slave), Modbus TCP server (slave), Ethernet/IP slave - EtherNet/IP master → PROFINET RT device (slave), Modbus TCP server (slave), EtherCAT slave - Modbus RTU master and RS‑232/485 → PROFINET RT device (slave), Modbus TCP server (slave), Ethernet/IP slave, EtherCAT slave - Modbus TCP master → Modbus TCP server (slave) - Modbus RTU slave and RS‑232/485 → EtherNet/IP master/scanner - Industrial Ethernet protocols → PROFINET RT device (slave), Modbus TCP server (slave), Ethernet/IP slave, EtherCAT slave - PROFIBUS IO device (slave) → PROFINET RT device (slave), Modbus TCP server (slave), Ethernet/IP slave, EtherCAT slave Technical specifications: - Supply voltage: 12–30 VDC - Current consumption: max. 200 mA @ 12 V, typical 160 mA @ 24 V - Mounting: DIN rail (35 × 7.5 / 15 mm) - Dimensions (L × W × H): 98 × 27 × 144 mm - Operating temperature: −25 to +70 °C - Certifications: CE, UL

Programmable with SPEED7® Studio, SIMATIC Manager, and TIA Portal The new design concept of the VIPA MICRO M13C features an enhanced display and operating concept that allows users to capture key system status information at a glance. It is extremely compact and, with a width of just under 72 mm, more than 50 % smaller than typical compact PLCs. - Very high performance enabled by SPEED7® technology - High‑speed backplane bus transfer rate of 48 Mbit/s - 128 kB memory (50 % program / 50 % data) - 30 integrated I/Os: 16 DI (4 counters), 12 DO 0.5 A (2 PWM), 2 AI (0…10 V / 4…20 mA) - CPU expandable with up to 8 additional modules - 2‑port Ethernet switch - S7 TCP, ISO‑on‑TCP, Modbus TCP, PROFINET controller via PG/OP (up to 8 devices), i‑Device, MRP client, OPC UA server - Optional dual RS‑485 module for MPI, PtP (Modbus RTU) / optional PROFIBUS slave (VIPA SD card and FSC‑C000S00 required) - Fully STEP7® compatible – supports STL (AWL), LAD (KOP), FBD (FUP), SCL, and GRAPH7 - Integrated WebVisu (VIPA SD card required) - Removable terminal blocks with spring‑clamp and push‑in technology

Featuring the inherent flexibility and precision of GFX/XTS technology, GFX-r provides movement in rectangular paths catering for higher payloads and increased in-process stresses.

AMKmotion is now launching its new DIP series – a next-generation line of synchronous servo motors. Delivering up to three times the acceleration of comparable drives, they combine exceptionally high power density with a compact footprint. The integrated reluctance torque component significantly reduces the use of rare-earth materials. Compact, dynamic, and resource-efficient: the new synchronous servo motor DIP sets new standards in drive technology. A compact powerhouse, it achieves three times the acceleration of comparable drives in its size class, while the reluctance torque component reduces the use of rare-earth materials. Users also benefit from shorter cycle times and increased productivity.

We are pleased to introduce version 5.0 of our Neugart Calculation Program (NCP) design software. This version focuses more on practical cycles, which can be imported from recorded system data. This allows for even more precise gearbox design and full utilization of the upper performance limit. Where applicable, this enables smaller sizes and thus cost savings for customers. In addition, NCP 5.0 visualizes gearbox utilization via characteristic map displays. User-friendliness has been further enhanced with new tools, such as those for determining positioning accuracy and pitch, as well as an optimized gearbox filter. The NCP Neugart Calculation Program makes it easy to find the perfect gearbox-motor combination. This intuitive tool simplifies drive train dimensioning and is free of charge for customers. Our goal: to make cooperation with our customers as efficient and easy as possible. This calculation software provides the perfect basis for designing the complete drive train. With the NCP, customers can configure the right gearbox-motor combination in just a few minutes by entering their application data. The result: exactly the right gearbox for your drive concept.